Industrial Door Operator
BS-KGT7-ZM
Industrial door operator, 360° chain‑pull lift, mechanical/encoder limit optional.
Total unit length: 455 mm Unit overall height: 252 mm Control box thickness: 118 mm
360° Manual Chain‑pull，Dual‑type Limit，220V/380V Optional，Max lift height ≤6
BS-KGT7-ZM Industrial Door Operator
50 / 75 / 100 N·m | 24 rpm Output | 6 m Lifting Height | Self-Check and Emergency Stop
The BISEN BS-KGT7-ZM is an industrial door operator family selected by output torque, electrical supply and door area. The catalogue configurations below have distinct ratings; match the exact order code to the door balance, shaft and lifting arrangement.
Key Features
Digital position detection and intelligent self-check with alerts.
Delayed automatic closing.
Open / close / stop controls with emergency stop.
External safety-device connections: pressure edge, infrared detector and warning light; confirm the selected controller.
Specifications
Parameter | 50 / 220 V | 75 / 220 V | 50S / 380 V | 75S / 380 V | 100S / 380 V |
|---|---|---|---|---|---|
Catalogue order code | KGT7.50-ZM | KGT7.75-ZM | KGT7.50S-ZM | KGT7.75S-ZM | KGT7.100S-ZM |
Supply voltage | 220 V ±10%, 50 Hz | 220 V ±10%, 50 Hz | 380 V ±10%, 50 Hz | 380 V ±10%, 50 Hz | 380 V ±10%, 50 Hz |
Motor power | 450 W | 550 W | 450 W | 550 W | 750 W |
Output torque | 50 N·m | 75 N·m | 50 N·m | 75 N·m | 100 N·m |
Output speed | 24 rpm | 24 rpm | 24 rpm | 24 rpm | 24 rpm |
Door area | <20 m² | <25 m² | <20 m² | <25 m² | <30 m² |
Maximum lifting height | 6 m | 6 m | 6 m | 6 m | 6 m |
Operating temperature | −20°C to +50°C | −20°C to +50°C | −20°C to +50°C | −20°C to +50°C | −20°C to +50°C |
Which Configuration Do I Need?
Requirement | Selection / Check |
|---|---|
Door area <20 m² / 50 N·m | Select 220 V or 380 V version |
Door area <25 m² / 75 N·m | Select 220 V or 380 V version |
Door area <30 m² / 100 N·m | 380 V configuration; verify mechanical requirements |
FAQ
How is the correct configuration selected? Use the required output torque, compatible door area, supply voltage and shaft geometry together. Confirm the door balance and installation drawing.
Are 220 V and 380 V versions interchangeable? No. Select the exact supply-voltage configuration in the table.
Does maximum door area apply to every version? No. The door-area limit is configuration-specific and must be checked with torque and installation conditions.
Can external safety devices be connected? Pressure-edge, infrared detector and warning-light connections are supported; confirm the controller and devices.
About BISEN
BISEN SMART ACCESS is a China-based manufacturer of barrier gates, gate operators and access-control equipment, serving distributors, integrators and contractors worldwide.
Get a quote: Send door area and height, door balance/type, shaft dimensions, required torque, supply voltage and safety-device requirements.