Automatic Bollard
BS-SY603M
Two‑stage split hydraulic bollard, shallow‑buried, sync‑control & LED warning
Outer diameters Φ219mm & Φ273mm, lifting height 600mm, embedding depth 610mm. Two‑stage hydraulic bollard, control box supplied separately.
Two‑stage Lifting，Split Hydraulic Drive，Shallow Embedded Installation，IP68 Waterproof
BS-SY603M Two-Stage Hydraulic Lifting Bollard
Split Hydraulic Drive | 600 mm Raised Height | Up to 6 Bollards per Controller | IP68 Bollard
The BISEN BS-SY603M is a two-stage telescopic hydraulic bollard for vehicle access control. A separate hydraulic drive arrangement reduces the buried assembly height, while the controller supports groups of three or six bollards. Confirm the excavation and foundation drawing for the installation.
Key Features
Two-stage telescopic drive with a separate hydraulic system.
Grouped control for three or six bollards.
Remote-controller and push-button-box control options.
Infrared and loop-detector connections for compatible detection equipment.
Steady or flashing warning-light modes and a reflective marking strip.
Specifications
Parameter | Specification |
|---|---|
Input voltage | 220 V AC ±10% |
Drive | Split hydraulic system with two-stage telescopic drive |
Raised blocking height | 600 ±2 mm |
Bollard diameters | 219 ±0.5 mm and 273 ±0.5 mm |
Bollard material | SUS304 stainless steel |
Rise speed | 150 mm/s |
Bollard IP rating | IP68 |
Control capacity | 3 or 6 bollards per controller |
Warning devices | Top warning-light ring; 50 mm reflective strip |
Power-failure lowering | Backup power operates the solenoid valve for lowering |
Operating temperature | −25°C to +55°C |
Below-zero operation | Timing differences between bollards may occur below 0°C |
Which Bollard Configuration Do I Need?
Requirement | Selection / Check |
|---|---|
Underground installation | Confirm utilities, excavation depth, drainage and approved foundation drawing |
Bollard group | Choose a three- or six-bollard controller and confirm spacing |
Cold-weather site | Review the below-zero timing qualification |
Emergency access | Confirm the backup-power and solenoid-valve lowering arrangement |
FAQ
How many bollards can one controller manage? A controller can be configured for three or six bollards, up to six bollards per controller.
What happens during a power failure? The specified arrangement uses backup power to operate a solenoid valve and lower the bollards.
Will all bollards move at exactly the same time below 0°C? Timing differences may occur below 0°C. Confirm cold-weather suitability for your project.
What excavation depth should be specified? Use the approved foundation drawing. Confirm the excavation depth and buried assembly dimensions with BISEN before construction.
About BISEN
BISEN SMART ACCESS is a China-based manufacturer of barrier gates, gate operators and access-control equipment, serving distributors, integrators and contractors worldwide.
Get a quote: Send the number of bollards, layout and spacing, underground/site conditions, approved foundation requirements, ambient temperature and emergency-lowering needs.